ASI 388 Electronic Grade RTV Silicone, Clear, 10.2 oz Cartridge (Pack of 3)
Original price was: $65.70.$58.99Current price is: $58.99.
$19.66 per cartridge · 3 cartridges
You save $6.71 (10%)
Currently out of stock
Pack
- Single$21.90
- Pack of 3$58.99
This ASI 388 3-pack gives you three 10.2 oz caulking cartridges of clear, neutral-cure electronic grade RTV silicone for control-panel builders, telecom crews and production lines that seal enclosures and cable entries in volume. ASI lists 500 V/mil dielectric strength, UL Recognition and -70°F to 400°F service; each cartridge needs a standard caulking gun.
Out of stock
Overview
The ASI 388 cartridge 3-pack is three of our single ASI 388 10.2 oz cartridges, shipped together for work that runs past one cartridge. ASI 388 cures by a neutral (oxime) chemistry rather than giving off acetic acid, which is why ASI positions it for electronics. Typical buyers: shops building control boxes and outdoor sensor housings in batches, and telecom installers weatherproofing coax across a site.
Key features
- Three gun-grade cartridges of clear, non-slump paste
- Oxime cure that ASI calls non-corrosive and electronic grade
- Dielectric strength of 500 V/mil and a dielectric constant of 3 at 50 Hz
- Carries UL Recognition (E209770) and meets MIL 46106B Type 1
Where to use it
ASI lists sealing lead-wire entries, waterproofing electronics, circuit board protection, component mounting, encapsulating and coaxial cable connectors. Three cartridges suit a batch of enclosures sealed on one shift, a field crew covering connectors at several sites, or a line where every unit gets the same bead. Each cartridge goes in a standard caulking gun.
How to use
- De-energize the equipment, degrease with 100% isopropyl alcohol or acetone, and let it dry.
- Load the gun and cut the nozzle to the bead you need.
- Skin time is about 20 minutes, so in production lay only as many beads as you can tool in that window.
- Cure takes about a day per 1/8″ bead, longer where the sealant is confined; ASI suggests adhesion checks on day 7.
Compatibility and cautions
Copper is the one to watch: ASI’s data sheet says 388 can discolor copper around the applied or confined area, so trial a sample where appearance matters. Plastics are listed only as “some plastics”. Curing releases methyl ethyl ketoxime (MEKO), and the SDS lists serious eye irritation, possible allergic skin reaction and suspected fertility effects, so provide gloves, eye protection and ventilation. ASI’s 12-month shelf life runs from its ship date and shortens with heat and humidity; buy to your production schedule. Label, TDS and SDS: technical documents.
Choosing between the 3-pack and the single cartridge
For one job, the single ASI 388 cartridge is enough, and bench repairs are easier with the ASI 388 2.8 oz squeeze tube. Where no electronics or sensitive metals are involved, the acetoxy ASI 502 clear 10.2 oz cartridge skins faster. Background: our neutral-cure silicone guide.
Specifications
| Net contents | 10.2 oz |
|---|---|
| Container | Caulking cartridge |
| Product type | One-part, moisture-cure, neutral-cure (oxime) RTV silicone - electronic grade |
| Color | Clear (translucent) |
| Viscosity | 1,000,000 cps (Spindle 7, 4 rpm) |
| Temperature range | -70°F to 400°F service; intermittent up to 450°F |
| Application temperature | -35°F to 150°F |
| Skin / tack-free time | Skin formation 20 minutes (70°F, 50% RH) |
| Cure time | 24 hours (1/8" bead); strength keeps increasing for 7 days - test adhesion on day 7 |
| Hardness | 30 Shore A |
| Tensile strength | 300 psi (ASTM D412) |
| Elongation at break | 600% (ASTM D412) |
| Dielectric strength | 500 V/mil (ASTM D149) |
| Dielectric constant | 3 at 50 Hz (ASTM D150) |
| Volume resistivity | 3 x 10^15 (ASTM D257) |
| Dissipation factor | 5 x 10^-3 at 50 Hz |
| Density | 8.7 lbs/gal (ASTM D1475) |
| Approvals & certifications | UL Recognized (File No. E209770); Meets MIL 46106B Type 1; VOC compliant (21 g/L, ASTM D2369) |
| Material compatibility | Glass; Most metals; Aluminum; Steel; Most fiberglass; Porous surfaces; Vinyl; PVC; Rubber; Natural & synthetic fiber; Most painted surfaces; Some plastics; Caution: can discolor copper around the applied or confined area; Test all substrates before use |
| Typical applications | Sealing lead wire entries; Waterproofing electronics; Circuit board protection; Electronic encapsulating; Component mounting; Telecommunications, including coaxial cable connectors |
| Shelf life | 12 months from shipment when stored at 70°F / 50% RH |
| Hazard / caution | Warning: causes serious eye irritation, may cause an allergic skin reaction, suspected of damaging fertility; releases methyl ethyl ketoxime (MEKO) while curing |
| Pack size | 3 × cartridge (set of three singles) |
Values from the manufacturer’s data sheet. Always confirm suitability for your application.
Documents (SDS / TDS)
- ASI 388 Electronic Grade Silicone — Technical Data SheetPDF · 637 KB
- ASI 388 Electronic Grade Silicone — Clear — Safety Data SheetPDF · 248 KB
Need a document that isn’t listed? Email contact@factoval.com and we’ll send it.
FAQ
Is the 3-pack the same silicone as the single ASI 388 10.2 oz cartridge?
Yes. It contains three of the same clear 10.2 oz ASI 388 cartridges, shipped together in one order.
Can ASI 388 be used near copper?
ASI calls 388 non-corrosive, but its data sheet warns that it can discolor copper around the applied or confined area. Test on a sample part before sealing a full batch.
How long do the spare cartridges keep?
ASI gives a 12-month shelf life from its date of shipment at 70°F and 50% RH and notes that high temperature and humidity can significantly reduce it. Store them indoors and use the oldest first.
Guides
Neutral Cure Silicone for Electronics: A Guide to ASI 388 Electronic Grade RTVNeutral cure silicone does not release acetic acid while curing, which makes it the right RTV for electronics. ASI 388's specs, where…Read the guide →
Lubricant Temperature Chart: Temperature Range, NSF H1 and Compatibility for Greases, Oils, Contact Cleaners and SealantsA side-by-side chart of temperature range, NSF H1 registration, base, NLGI grade or viscosity, dielectric strength and rubber and plastic compatibility for…Read the guide →
Shipping & returns
Shipping
Free standard shipping on orders of $35+. Below that, a flat $5.99 per order. Orders ship from Pennsauken, NJ within 1–3 business days; delivery usually takes 3–7 business days. We ship to the contiguous U.S. only.
Returns
Return unopened, unused items in original sealed packaging within 30 days of delivery. Damaged, defective or wrong items: tell us within 7 days (with photos) and we’ll replace or refund.
Questions?
Not sure this is the right product for your application? Call (551) 401-4841 or email contact@factoval.com.





