ASI 502 100% RTV Silicone Sealant, Clear, 10.2 oz Cartridge (Pack of 3)
Original price was: $34.99.$29.99Current price is: $29.99.
$10.00 per cartridge · 3 cartridges
You save $5.00 (14%)
Currently out of stock
Pack
- Single$12.99
- Pack of 3$29.99
This ASI 502 3-pack gives you three clear 10.2 oz caulking cartridges of 100% acetoxy RTV silicone for duct, refrigeration and commercial-kitchen jobs that go through more than one cartridge. Each loads into a standard caulking gun; ASI lists 25% joint movement (ASTM C920 Class 25), NSF Standard 51 for incidental food contact and -70°F to 400°F service.
Out of stock
Overview
Three clear 10.2 oz cartridges of ASI 502 100% RTV silicone, the same cartridge as our single ASI 502 10.2 oz. These are cartridges, not tubes, so you need a caulking gun. The pack is meant for jobs measured in feet rather than inches, such as a run of ductwork, a set of walk-in freezer panels or a restaurant’s sinks and backsplashes, where running out halfway means a trip to the supplier.
Key features
- Three gun-grade cartridges of non-slump paste that ASI says extrudes easily in the cold
- Construction grade: ASTM C920 Class 25, for joints that move up to 25%
- ASI’s data sheet lists NSF Standard 51 and FDA 21 CFR 177.2600 for incidental food contact
- Cured rubber handles -70°F to 400°F
Where to use it
ASI names HVAC and ductwork, refrigeration units, walk-in freezers, appliance manufacturing, sheet metal, countertops and sanitary seals. The 3-pack fits an HVAC installer with a day of duct joints, a refrigeration crew setting walk-in panels, a restaurant facilities team, or an assembly bench that empties cartridge after cartridge, each one in a standard caulking gun.
How to use
- Strip old sealant, wipe with 100% isopropyl alcohol or acetone (no petroleum solvents), and let the joint dry.
- Load the caulking gun, cut the nozzle to the joint width, and work within ASI’s -35°F to 150°F range.
- On long runs, bead and tool one section at a time, since a skin forms in roughly 10 minutes.
- Expect a day of cure per 1/8″ of depth, more for deep or confined joints; test adhesion after a week.
Compatibility and cautions
Adhesion to plastics varies, so run a test bead first. Skip concrete, mortar, brick and other porous surfaces, and do not plan to paint over it. ASI notes the acetoxy cure is corrosive to sensitive metals when confined, so leave electronics to a neutral-cure silicone. The food listing covers NSF 51, not NSF 61 drinking water. Documents: technical documents.
Choosing between the 3-pack and the single cartridge
If one cartridge finishes the job, buy the single 10.2 oz cartridge. For touch-ups without a gun, the ASI 502 clear 2.8 oz squeeze tube holds the same sealant, also in white and black. Electronics call for the neutral-cure ASI 388 10.2 oz cartridge. See our acetoxy vs neutral cure guide.
Specifications
| Net contents | 10.2 oz |
|---|---|
| Container | Caulking cartridge |
| Product type | One-component, moisture-cure acetoxy RTV silicone (100% silicone) |
| Color | Clear |
| Viscosity | 902,000 cps (Spindle 7, 4 rpm) |
| Temperature range | -70°F to 400°F service; intermittent up to 450°F |
| Application temperature | -35°F to 150°F |
| Skin / tack-free time | Skin formation 10 minutes (70°F, 50% RH) |
| Cure time | 24 hours (1/8" bead); strength keeps increasing for 7 days - test adhesion on day 7 |
| Hardness | 25 Shore A |
| Tensile strength | 264 psi (ASTM D412) |
| Elongation at break | 500% (ASTM D412) |
| Joint movement | 25% joint movement (ASTM C920 Class 25) |
| Density | 8.5 lbs/gal (ASTM D1475) |
| Paintability | Not paintable |
| Food contact | Acceptable as a sealant on surfaces with incidental food contact (NSF 51) |
| Approvals & certifications | ASTM C920 Class 25, Type S, Grade NS, Use NT, G, O; TT-S-01543A; TT-S-00230-C; MIL 46106B Type 1; NSF Standard 51; FDA 21 CFR 177.2600; UL Recognized (File No. E209770); VOC compliant (23 g/L, ASTM D2369) |
| Material compatibility | Glass; Most metals; Steel; Aluminum; Ceramic; Porcelain; Tile; Marble; PVC; Most fiberglass; Most types of wood; Solid surface countertops; Most painted substrates; Some plastics; Do not use on porous surfaces such as concrete, mortar or brick; Acetoxy cure: corrosive to sensitive metals when confined |
| Typical applications | HVAC and ductwork; Appliance manufacturing and refrigeration units; Walk-in freezers; Formed-in-place gaskets; Countertops, kitchen & bath, sanitary seals; Telecommunications, including coaxial cable connectors |
| Shelf life | 12 months from shipment when stored at 70°F / 50% RH |
| Hazard / caution | Not classified as hazardous (GHS); acetic acid (vinegar) odor while curing - use only outdoors or in a well-ventilated area |
| Pack size | 3 × cartridge (set of three singles) |
Values from the manufacturer’s data sheet. Always confirm suitability for your application.
Documents (SDS / TDS)
Need a document that isn’t listed? Email contact@factoval.com and we’ll send it.
FAQ
Is the 3-pack the same sealant as the single ASI 502 10.2 oz cartridge?
Yes. It contains three of the same clear 10.2 oz ASI 502 caulking cartridges, shipped together in one order.
Do I need a caulking gun for these cartridges?
Yes. The 10.2 oz size is a caulking cartridge and is dispensed with a standard caulking gun. The ASI 502 squeeze tube that needs no gun is the 2.8 oz size.
How should I store the spare cartridges?
ASI gives a 12-month shelf life from its date of shipment at 70°F and 50% RH and says not to store ASI 502 at elevated temperatures. Keep spares indoors in a cool, dry place, not in a hot attic or vehicle.
Guides
Acetoxy vs Neutral Cure Silicone: When to Use ASI 502Acetoxy silicone releases acetic acid as it cures, skins fast and bonds well to glass, tile and metal; neutral cure has low…Read the guide →
Lubricant Temperature Chart: Temperature Range, NSF H1 and Compatibility for Greases, Oils, Contact Cleaners and SealantsA side-by-side chart of temperature range, NSF H1 registration, base, NLGI grade or viscosity, dielectric strength and rubber and plastic compatibility for…Read the guide →
Shipping & returns
Shipping
Free standard shipping on orders of $35+. Below that, a flat $5.99 per order. Orders ship from Pennsauken, NJ within 1–3 business days; delivery usually takes 3–7 business days. We ship to the contiguous U.S. only.
Returns
Return unopened, unused items in original sealed packaging within 30 days of delivery. Damaged, defective or wrong items: tell us within 7 days (with photos) and we’ll replace or refund.
Questions?
Not sure this is the right product for your application? Call (551) 401-4841 or email contact@factoval.com.








