ASI 388 Electronic Grade RTV Silicone, Clear, 2.8 oz Squeeze Tube (Pack of 3)
Original price was: $33.90.$29.99Current price is: $29.99.
$10.00 per tube · 3 tubes
You save $3.91 (12%)
Currently out of stock
Pack
- Single$11.30
- Pack of 3$29.99
This ASI 388 3-pack gives you three clear 2.8 oz squeeze tubes of neutral-cure electronic grade RTV silicone, one for each repair bench, field kit or technician. It seals, insulates and encapsulates small electronic parts by hand, and ASI lists 500 V/mil dielectric strength, UL Recognition, MIL 46106B Type 1 and -70°F to 400°F service.
Out of stock
Overview
This pack is three of the ASI 388 2.8 oz squeeze tubes we also sell one at a time. The squeeze tube is the bench format of ASI’s electronic grade silicone, and three of them fit places where more than one person or bench needs it: an electronics repair shop, a field service team with a tube in each kit, or a school or makerspace lab. ASI 388 cures with moisture from the air, so spares stay ready as long as they stay sealed.
Key features
- Three hand-held tubes; no caulking gun
- Neutral cure that gives off no acetic acid
- Insulating rubber with a published dielectric strength of 500 V/mil
- UL Recognized; meets MIL 46106B Type 1, per ASI
- Cures clear (translucent) and flexible, at 30 Shore A
Where to use it
ASI’s list covers lead-wire entries, waterproofing electronics, circuit board protection, component mounting, encapsulating and coax connectors. On the bench that looks like sealing where a cable enters a housing, fixing a component to a board, covering a connection in an outdoor enclosure or weatherproofing a coax fitting. With three tubes, each bench or kit has its own.
How to use
- Power down, then clean the spot with isopropyl alcohol or acetone and let it dry.
- Apply a bead or dab, then shape it before the 20-minute skin forms.
- Wait about 24 hours per 1/8″ of thickness before closing the housing; full strength takes a week.
Compatibility and cautions
Test on exposed copper before using it on a board you care about: ASI notes 388 may discolor copper near the applied or confined area. Glass, most metals, vinyl, PVC and rubber are listed substrates; plastics vary. The cure gives off methyl ethyl ketoxime (MEKO), and the SDS warns of eye irritation, skin sensitization and suspected fertility effects, so wear gloves and safety glasses and ventilate. Unopened tubes keep 12 months from ASI’s ship date at 70°F and 50% RH. SDS: technical documents page.
Choosing between the 3-pack and the single tube
One bench and occasional use: the single 2.8 oz tube. Production work goes faster with the ASI 388 10.2 oz cartridge in a caulking gun. For general sealing away from electronics, ASI 502 clear is the acetoxy option. Our guide to neutral-cure silicone for electronics explains the chemistry.
Specifications
| Net contents | 2.8 oz |
|---|---|
| Container | Squeeze tube |
| Product type | One-part, moisture-cure, neutral-cure (oxime) RTV silicone - electronic grade |
| Color | Clear (translucent) |
| Viscosity | 1,000,000 cps (Spindle 7, 4 rpm) |
| Temperature range | -70°F to 400°F service; intermittent up to 450°F |
| Application temperature | -35°F to 150°F |
| Skin / tack-free time | Skin formation 20 minutes (70°F, 50% RH) |
| Cure time | 24 hours (1/8" bead); strength keeps increasing for 7 days - test adhesion on day 7 |
| Hardness | 30 Shore A |
| Tensile strength | 300 psi (ASTM D412) |
| Elongation at break | 600% (ASTM D412) |
| Dielectric strength | 500 V/mil (ASTM D149) |
| Dielectric constant | 3 at 50 Hz (ASTM D150) |
| Volume resistivity | 3 x 10^15 (ASTM D257) |
| Dissipation factor | 5 x 10^-3 at 50 Hz |
| Density | 8.7 lbs/gal (ASTM D1475) |
| Approvals & certifications | UL Recognized (File No. E209770); Meets MIL 46106B Type 1; VOC compliant (21 g/L, ASTM D2369) |
| Material compatibility | Glass; Most metals; Aluminum; Steel; Most fiberglass; Porous surfaces; Vinyl; PVC; Rubber; Natural & synthetic fiber; Most painted surfaces; Some plastics; Caution: can discolor copper around the applied or confined area; Test all substrates before use |
| Typical applications | Sealing lead wire entries; Waterproofing electronics; Circuit board protection; Electronic encapsulating; Component mounting; Telecommunications, including coaxial cable connectors |
| Shelf life | 12 months from shipment when stored at 70°F / 50% RH |
| Hazard / caution | Warning: causes serious eye irritation, may cause an allergic skin reaction, suspected of damaging fertility; releases methyl ethyl ketoxime (MEKO) while curing |
| Pack size | 3 × tube (set of three singles) |
Values from the manufacturer’s data sheet. Always confirm suitability for your application.
Documents (SDS / TDS)
- ASI 388 Electronic Grade Silicone — Technical Data SheetPDF · 637 KB
- ASI 388 Electronic Grade Silicone — Clear — Safety Data SheetPDF · 248 KB
Need a document that isn’t listed? Email contact@factoval.com and we’ll send it.
FAQ
Is the 3-pack the same silicone as the single ASI 388 tube?
Yes. It contains three of the same clear 2.8 oz ASI 388 squeeze tubes, shipped together in one order.
Can I use ASI 388 on a circuit board?
Yes, within ASI's limits: circuit board protection and electronic encapsulating are listed uses, and the neutral cure releases no acetic acid. ASI also notes it can discolor copper around the applied area, so try it on exposed copper first.
Why use ASI 388 instead of ASI 502 on electronics?
ASI 502 is an acetoxy silicone that releases acetic acid as it cures, and ASI says that cure is corrosive to sensitive metals when confined. ASI 388 uses a neutral (oxime) cure and is the ASI sealant positioned for electronics.
Guides
Neutral Cure Silicone for Electronics: A Guide to ASI 388 Electronic Grade RTVNeutral cure silicone does not release acetic acid while curing, which makes it the right RTV for electronics. ASI 388's specs, where…Read the guide →
Acetoxy vs Neutral Cure Silicone: When to Use ASI 502Acetoxy silicone releases acetic acid as it cures, skins fast and bonds well to glass, tile and metal; neutral cure has low…Read the guide →
What Does RTV Silicone Mean? A Guide to ASI Silicone SealantsRTV means room-temperature vulcanizing: the silicone cures into rubber from moisture in the air, skinning in minutes, curing about 1/8 inch per…Read the guide →
Shipping & returns
Shipping
Free standard shipping on orders of $35+. Below that, a flat $5.99 per order. Orders ship from Pennsauken, NJ within 1–3 business days; delivery usually takes 3–7 business days. We ship to the contiguous U.S. only.
Returns
Return unopened, unused items in original sealed packaging within 30 days of delivery. Damaged, defective or wrong items: tell us within 7 days (with photos) and we’ll replace or refund.
Questions?
Not sure this is the right product for your application? Call (551) 401-4841 or email contact@factoval.com.





