Free shipping on orders $35+ · $5.99 under $35 · Ships from New Jersey

Super Lube 21030 vs 92003 (and 91003, 97008): Which Super Lube Grease?

Super Lube 21030 is a silicone-free synthetic grease with PTFE for metal parts under load: bearings, slides, chains, hinges and linkages. Super Lube 92003 is a silicone grease with PTFE for rubber, plastic and mixed metal-plastic parts, where it also dampens noise and vibration. Both are NLGI 2 and NSF H1 food grade. Two specialists round out the family: 91003 for electrical connectors and vacuum seals, and 97008 for brake assemblies.

Products in this guide

All 4 products in this guide ↓

21030 vs 92003 vs 91003 vs 97008

Super Lube grease Base Temperature range Dielectric strength Made for
21030 Multi-Purpose Synthetic Grease Synthetic fluids + Syncolon (PTFE); no silicone -45°F to 450°F (-43°C to 232°C) 643 V/mil Bearings, cams, slides, chains, hinges, linkages, chassis points
92003 Silicone Lubricating Grease Silicone (5,000 cSt base oil) + Syncolon -40°F to 500°F (-40°C to 260°C) 400 V/mil Plastic gears, rubber parts, bushings, sealing rings, sound dampening
91003 Silicone Dielectric and Vacuum Grease Non-curing silicone compound -40°F to 500°F (-40°C to 260°C) 777 V/mil Electrical connectors and boots, vacuum and pressure seals, stopcocks
97008 Silicone Brake Grease Silicone + Syncolon -40°F to 500°F (-40°C to 260°C) 400 V/mil Caliper slides and pivots, backing plates, caliper O-rings, drum brakes

All figures from Super Lube’s technical data sheets. All four are NLGI 2. 21030, 92003 and 91003 are NSF H1 registered (#096790, #141974 and #141973) for incidental food contact.

Silicone grease vs synthetic grease: the core difference

21030 is a synthetic-base grease built for friction and wear on metal. Super Lube lists plain, anti-friction, ball, roller and wheel bearings, cams, slides, valves, conveyors and chains, hubs, axles and chassis points, linkages, hinges and locks among its uses. It has the higher dielectric strength of the two general greases, a dropping point above 550°F (287°C), and Super Lube states it contains no silicone, so it is safe around paint spraying and finishing operations where silicone contamination causes problems. It is also compatible with most other greases, according to Super Lube.

92003 is a non-curing silicone compound with the same Syncolon PTFE added. Super Lube positions it for metal-to-plastic and plastic-to-plastic contact, rubber parts, sealing rings, bushings and sleeves, grommets, control cables and plastic gears, and highlights excellent sound dampening, resistance to water washout and compatibility with the majority of rubber and plastic compounds. It will not harden, dry out or melt, and it covers a slightly wider temperature range, up to 500°F.

A simple rule: if the part is metal and carries load, start with 21030; if rubber or plastic is involved, or you want to quiet a rattle or squeak between plastic parts, start with 92003.

Common jobs, matched to a grease

  • Wheel and trailer bearings, chains, garage door hinges, gate hinges: 21030.
  • Plastic gears, plastic-to-plastic parts, rattling trim and control cables: 92003.
  • Treadmill and exercise equipment mechanisms: 92003 lists treadmills and exercise equipment.
  • Sealing rings, valve seals and rubber gaskets: 92003 or 91003; for O-rings specifically, see the dedicated products on our O-ring lubricant page.
  • Spark plug boots, distributor caps, battery cables and electrical connectors: 91003, the dielectric grease. See our dielectric grease page.
  • Vacuum and pressure systems and stopcocks: 91003, which Super Lube rates for low vapor pressure (5 x 10^-10 Torr at 25°C) and low outgassing.
  • Brake caliper slides, pins and backing plates: 97008.
  • Food processing equipment: 21030 or 92003, both NSF H1. Our food grade grease page lists all H1 options.

91003 vs 92003: dielectric grease or silicone grease?

Both are NLGI 2 silicone greases with the same temperature range, and both are compatible with most plastics and rubbers. The difference is the job. 91003 is formulated for electrical and vacuum work, with the highest dielectric strength in the family (777 V/mil), low vapor pressure and low outgassing, and Super Lube does not list Syncolon in it. 92003 adds Syncolon PTFE for lubrication and is the better choice for moving mechanical parts and sound dampening. If you are sealing a connector or a vacuum joint, choose 91003; if something slides or rotates, choose 92003.

97008 vs 92003: why a dedicated brake grease?

97008 shares 92003’s silicone-plus-Syncolon makeup, temperature range and dielectric strength, but Super Lube formulates and packages it for the entire brake assembly. Its data sheet lists it as safe for caliper seals, says it dampens vibration between contact points and claims it eliminates disc brake squeal, and its uses include caliper slides and pivots, backing plates, caliper O-rings, self-adjusters, parking brake points and drum brake systems. It comes in a larger 8 oz tube for shop use. Keep any grease off pads, rotors and drum friction surfaces.

One caution: silicone on silicone rubber

Silicone greases are compatible with most rubbers, but Super Lube’s compatibility charts for its O-ring silicone grease and lubricant list silicone rubber (VMQ, MQ, FMQ, PMQ, VMFQ) as not compatible. If a seal is made of silicone rubber, check the seal maker’s recommendation before using any silicone grease on it.

Sizes and packages

21030 is the 3 oz tube of Super Lube’s multi-purpose grease; the same grease comes in a ½ oz tube (21010), a 3 oz cartridge (21036), a 14.1 oz cartridge (41150) and a 14.1 oz canister (41160). 92003 is the 3 oz tube of the silicone lubricating grease, also offered as a 14.1 oz cartridge (92150) and a 14.1 oz canister (92016). Three-packs of 21030 and 92003 are available for shops. All are on our greases and oils page.

Frequently asked questions

What is the difference between Super Lube 92003 and 21030?

21030 is a silicone-free synthetic grease with PTFE for loaded metal parts; 92003 is a silicone grease with PTFE for rubber, plastic and sound dampening. Both are NLGI 2 and NSF H1.

Can I use 21030 on plastic?

Check Super Lube’s compatibility chart for the specific plastic. For plastic gears and plastic-to-plastic contact, Super Lube positions the silicone 92003.

Is 92003 a dielectric grease?

It is dielectric (400 V/mil), but 91003 is Super Lube’s dedicated dielectric and vacuum grease, with 777 V/mil.

Which Super Lube grease for brakes?

97008, which Super Lube formulates for caliper slides, pivots, backing plates, caliper O-rings and drum brakes and lists as safe for caliper seals.

Bottom line

Metal and load: 21030. Rubber, plastic and noise: 92003. Electrical and vacuum: 91003. Brakes: 97008. For the background on Syncolon and food-grade ratings, read what Super Lube grease is; for oils, see the Super Lube oil guide.

Products in this guide


Sources

Scroll to Top