Super Lube 11016 Dri-Film Lubricant with Syncolon, 11 oz Aerosol (Pack of 3)
Part # 11016
Original price was: $44.97.$39.99Current price is: $39.99.
$13.33 per can · 3 cans
You save $4.98 (11%)
Currently out of stock
Pack
- Single$14.99
- Pack of 3$39.99
This Super Lube 11016 3-pack gives you three 11 oz cans of Dri-Film Lubricant with Syncolon (PTFE), a dry film lubricant spray that leaves a clean white coating that does not attract dust. It suits locksmiths, building maintenance crews and molding shops that use a dry lubricant every day. Rated -45°F to 500°F (-43°C to 260°C) and NSF H1 registered.
Out of stock
Overview
The Super Lube 11016 3-pack contains three 11 oz cans of Dri-Film Lubricant with Syncolon®, the same aerosol sold as the single 11016 can. Its fast-evaporating solvent leaves a dry, white film of sub-micron Syncolon (PTFE) particles. People who use a dry lubricant every day go through cans: locksmiths working from a van, crews servicing door hardware across several buildings, molding shops using it as a release agent, and fitness equipment technicians.
Key features
- Three 11 oz aerosol cans of part number 11016
- Dries on contact to a non-oily film that will not attract dust
- Low coefficient of friction with release properties; cleans while it lubricates
- Non-conducting; per the data sheet, not affected by oil, water or solvents
- NSF H1 (#136743), Kosher; VOC exempt under California rules; made in USA
Where to use it
Door locks and lock cylinders, window guides, industrial slides and glides, chains and cable swivels, zippers, precision instruments, musical instruments, exercise equipment, bicycles and radio-controlled models. It is also listed for food processing equipment.
How to use
- Work in a well-ventilated area, away from open flame or incandescent material.
- Shake the can well before using.
- Spray a light coat; fit the extension tube for lock cylinders and tight gaps.
- Let the solvent evaporate, leaving the white film, then work the mechanism.
Compatibility and cautions
The film can go on wood, paper, glass, rubber, fabric, leather, vinyl, metal and most plastics not under stress; test plastics on a hidden spot first. The SDS classifies the can as an extremely flammable aerosol that may burst if heated; it causes skin irritation, is suspected of damaging fertility, and may be fatal if swallowed and it enters the airways. Spray electronics only with the power off, and store spare cans out of direct sunlight and never above 122°F (50°C). A California Proposition 65 warning applies (see Prop 65 & Product Safety). Aerosols ship by ground only to street addresses in the contiguous U.S. (no P.O. Boxes) and cannot be returned for a change of mind.
Choosing between the 3-pack and the single
For a household lock or an occasional bike chain, the single 11016 can is usually enough. Where a part needs a wet grease film, use 31110 synthetic spray grease; for rubber seals and weather stripping, Super Lube 91110 silicone spray. The Super Lube aerosol guide compares all three.
Specifications
| Part number | 11016 |
|---|---|
| Net contents | 11 oz |
| Container | Aerosol |
| Product type | Dry-film lubricant (dries on contact to a non-oily film) |
| Base / composition | Syncolon® powder and solvent blend; dries to a white solid film |
| Color | Off-white / opaque liquid, dries to white solid |
| Viscosity | 5 cSt |
| Temperature range | -45°F to 500°F (-43°C to 260°C) |
| Approvals & certifications | NSF H1 registered (#136743); Kosher certified; VOC exempt (California) |
| Material compatibility | Wood, paper, glass, rubber, fabric, leather, vinyl and metal; Most plastics not under stress |
| Typical applications | Industrial slides and glides; Door locks and lock cylinders; Chains and cable swivels; Molding release agent; Precision instruments; Electrical and electronic equipment |
| Country of origin | Made in USA |
| Hazard / caution | Danger: extremely flammable aerosol; pressurized container, may burst if heated; causes skin irritation; suspected of damaging fertility; may be fatal if swallowed and enters airways |
| Pack size | 3 × can (set of three singles) |
Values from the manufacturer’s data sheet. Always confirm suitability for your application.
Documents (SDS / TDS)
- Super Lube Dri Film Lubricant With Syncolon® — Technical Data SheetPDF · 253 KB
- Super Lube 11016 Dri-Film Lubricant Aerosol — SDSPDF · 162 KB
Need a document that isn’t listed? Email contact@factoval.com and we’ll send it.
FAQ
Is the 3-pack the same spray as the single Super Lube 11016?
Yes. It contains three 11 oz cans of 11016 Dri-Film Lubricant with Syncolon, identical to the single can.
Can Dri-Film be used as a mold release?
Yes. Super Lube lists it as a molding release agent; the dry Syncolon coating has a low coefficient of friction and release properties. Try it on a sample part first to confirm the release and surface finish meet your requirements.
Is it good for lock cylinders?
Door locks and lock cylinders are among Super Lube's listed applications. Use the extension tube to reach into the keyway; the solvent evaporates and leaves a dry film that will not attract dust.
Guides
Silicone Spray vs PTFE Dry Lube vs Synthetic Spray Grease: Which Aerosol?Silicone spray leaves a wet film for rubber and weatherstripping, PTFE dry film leaves a clean coating that does not attract dust,…Read the guide →
Lubricant Temperature Chart: Temperature Range, NSF H1 and Compatibility for Greases, Oils, Contact Cleaners and SealantsA side-by-side chart of temperature range, NSF H1 registration, base, NLGI grade or viscosity, dielectric strength and rubber and plastic compatibility for…Read the guide →
Shipping & returns
Shipping
Free standard shipping on orders of $35+. Below that, a flat $5.99 per order. Orders ship from Pennsauken, NJ within 1–3 business days; delivery usually takes 3–7 business days. We ship to the contiguous U.S. only.
This item ships by ground only (regulated aerosol/fuel) and can’t ship to P.O. boxes.
Returns
This is a regulated hazardous item (aerosol or fuel), so it can’t be returned for a change of mind, even unopened. If it arrives damaged, defective or wrong, tell us within 7 days (with photos) and we’ll replace or refund it — we’ll provide a compliant label if it needs to come back.
Questions?
Not sure this is the right product for your application? Call (551) 401-4841 or email contact@factoval.com.








