Free shipping on orders $150+ · $7–$15 by state under $150 · Ships from New Jersey

Account 0Cart
DeoxIT F5S-H6 FaderLube Spray, 5 oz
DeoxIT F5S-H6 FaderLube Spray, 5 oz – front with L-M-H valve
DeoxIT F5S-H6 FaderLube Spray, 5 oz – cap off with straw
DeoxIT F5S-H6 FaderLube Spray, 5 oz – back
DeoxIT F5S-H6 FaderLube Spray, 5 oz – side label
DeoxIT F5S-H6 FaderLube Spray, 5 oz – in use mixer faders
DeoxIT

DeoxIT F5S-H6 FaderLube Spray, 5 oz

Part # F5S-H6

$21.99

In stock · ships in 1–3 business days

DeoxIT F5 FaderLube (CAIG F5S-H6) is a 5% spray lubricant for conductive-plastic faders, slide pots, carbon-based controls and other sliding contacts. Its flushing solvent washes out dust and drink residue, then leaves a thin film that restores lost lubrication. It is not a deoxidizer and not for metal connectors. 5 oz (142 g); flammable aerosol, ground shipping only.

Availability: 10 in stock

  • Free shipping on orders $150+ · $7–$15 by state below
  • Ground shipping only (regulated aerosol/fuel) — no P.O. boxes. Why?
  • Hazardous item: returnable only if damaged, defective or wrong. Return policy
  • Secure checkout · Visa, Mastercard, Amex, Discover
Categories: , Tags: Brand:

Overview

DeoxIT F5, sold as FaderLube spray part F5S-H6, is CAIG Laboratories’ moving-contact lubricant for conductive plastic and carbon-based controls: faders, slide potentiometers, switches, conductive membranes and other mechanisms with sliding surfaces. These parts lose their original lubrication through wear, repeated cleaning, dust, smoke and spills. F5 flushes out loose contamination and replaces that lubrication so controls move smoothly again. CAIG is clear that DeoxIT Fader is not a deoxidizer.

Key features

  • 5% DeoxIT Fader F100L, 75% odorless mineral spirits, 20% difluoroethane (CAIG)
  • Flushing action; adjustable Low-Med-High valve with extension straw
  • About 1,000 applications per 5 oz (142 g) can
  • Rated -15°F to 302°F (-26°C to 150°C); NSN 6850-01-477-1528

Where to use it

Mixing-console and DJ faders, slide potentiometers and pots with carbon or conductive-plastic tracks, conductive membrane switches and mouse-pad style membranes, and sliding metal-to-plastic mechanisms. For metal contacts and connectors, use DeoxIT D-Series instead.

How to use

  1. Turn off and unplug the equipment.
  2. If metal parts of the control are oxidized, pre-treat them with DeoxIT D5 first, as CAIG directs.
  3. Set the valve, fit the extension straw and apply one short burst onto the plastic track.
  4. Move the fader or knob through its travel to distribute it, wait a few seconds and apply one more short burst.
  5. Wait two minutes before switching on. For extra tactile feel, finish with DeoxIT FaderGrease.

Compatibility and cautions

CAIG calls F5 safe on plastics, but with the solvent present ABS and polycarbonate rate Fair to Good and acrylic and polystyrene Fair, and rubber may swell until the solvent evaporates; test vintage ABS parts first. The SDS classifies the can as an extremely flammable aerosol (H222) that may burst if heated (H229) and an aspiration hazard (H304). CAIG notes it is flammable until the solvent evaporates, within 2–3 minutes. Keep it away from flames and sparks, store below 122°F (50°C), and read the label and SDS. Ships by ground only to the contiguous US (shipping policy).

Choosing between F5, F100L, FaderGrease and D5

Product Form Use it for
DeoxIT F5 (this spray) 5% spray, flushing Dirty or sticky faders that need cleaning and re-lubrication
DeoxIT F100L-L25C 100% liquid, needle Clean controls; precise drops, no solvent
FaderGrease DFG-213-8G 100% grease, syringe Extra damping and tactile feel
DeoxIT D5 5% spray, deoxidizer Oxidized metal contacts, jacks and switches

Read our DeoxIT D5 vs F5 guide for pots and faders.

Specifications

Part numberF5S-H6
Net contents5.0 oz (142 g); 182 mL
ContainerAerosol spray can with Low-Med-High (L-M-H) adjustable valve
Product typeMoving contact lubricant for conductive plastic faders & controls (5% spray, flushing action)
Base / composition5% DeoxIT Fader F100L, 75% odorless mineral spirits (CAS 64742-88-7), 20% difluoroethane (CAS 75-37-6)
ColorLight green
Temperature range-15°F to 302°F (-26°C to 150°C)
VOC content75% (588 g/L)
Deoxidizing actionNot a deoxidizer (approx. 1% cleaning action)
Applications per packageApprox. 1,000 applications
Approvals & certificationsRoHS compliant; VOC compliant
Material compatibilitySafe on plastics; Test first on sensitive parts and vintage equipment with aging ABS plastic; On rubber, may swell until solvent evaporates; With solvent: ABS and polycarbonate rated Fair-Good; PMMA and PS Fair; TPE/rubber/varnish Poor; Not for metal contacts/connectors (use DeoxIT D-Series, Gold or Shield)
Typical applicationsConductive plastic faders; Slide potentiometers; Switches and other mechanisms with sliding surfaces; Conductive membranes (e.g. mouse pads); Carbon-based controls and sliding metal-plastic surfaces; Flushing dirt, grease and drink residue from faders before lubrication
NSN6850-01-477-1528
Hazard / cautionExtremely flammable aerosol (H222); pressurized container, may burst if heated (H229); may be fatal if swallowed and enters airways (H304)

Values from the manufacturer’s data sheet. Always confirm suitability for your application.

Documents (SDS / TDS)

Need a document that isn’t listed? Email contact@factoval.com and we’ll send it.

FAQ

What is the difference between DeoxIT D5 and F5?

D5 is a deoxidizing contact cleaner for metal contacts and connectors. F5 is a lubricant for conductive-plastic and carbon-based faders and controls; CAIG says it is not a deoxidizer and not for metal contacts.

Which DeoxIT should I use on scratchy guitar or amp pots?

For the carbon or conductive-plastic track, CAIG specifies the F-Series, such as F5. If the pot's metal wiper or terminals are oxidized, CAIG says to pre-treat those metal parts with D5 first.

Does DeoxIT F5 clean faders?

Its solvent flushes out dust, dirt and drink residue, but the Fader concentrate itself has little or no chemical cleaning action (CAIG lists 0 to 1%). CAIG positions it as a lubricant that replaces what cleaning removed.

Is DeoxIT F5 safe on plastic faders?

Yes. CAIG formulated it for conductive plastics and calls it safe on plastics; with the solvent present, test acrylic, polystyrene and aging ABS first.

Shipping & returns

Shipping

Free standard shipping on orders of $150+. Below that, a flat rate by state: $7–$15 depending on distance from our New Jersey warehouse (shown at checkout). Orders ship from Pennsauken, NJ within 1–3 business days; delivery usually takes 3–7 business days. We ship to the contiguous U.S. only.

This item ships by ground only (regulated aerosol/fuel) and can’t ship to P.O. boxes.

Full shipping policy

Returns

This is a regulated hazardous item (aerosol or fuel), so it can’t be returned for a change of mind, even unopened. If it arrives damaged, defective or wrong, tell us within 7 days (with photos) and we’ll replace or refund it — we’ll provide a compliant label if it needs to come back.

Return & refund policy

Questions?

Not sure this is the right product for your application? Call (551) 401-4841 or email contact@factoval.com.

Complete the job

Scroll to Top