Super Lube 21036 Multi-Purpose Synthetic Grease with Syncolon, 3 oz Cartridge

Super Lube 21036 packs the brand’s Multi-Purpose Synthetic Grease with Syncolon® in a 3 oz cartridge instead of a squeeze tube. The cartridge loads into compact grease guns built for 3 oz cartridges, so you can push grease through zerk fittings where a full-size gun is awkward or overkill: mowers, ATVs, trailers, carts, small conveyors and shop machinery. The grease inside is identical to the 3 oz 21030 tube; only the package changes.

Key features

• 3 oz cartridge for mini grease guns; confirm your gun takes 3 oz cartridges
• NLGI 2 with NLGI GC-LB certification for wheel bearings and chassis points
• -45°F to 450°F (-43°C to 232°C); low-temperature torque tested at -54°C (ASTM D1478)
• Water washout under 1%; passes a 100-hour salt spray test (ASTM B117)
• NSF H1 (#096790), Kosher and Halal; silicone-free; made in USA

Where to use it

Grease fittings on lawn and garden equipment, snow blowers, trailer and buddy bearings, hubs, axles, chassis points, fifth wheels, winches, generator and blower fan bearings, conveyors, and food-processing equipment where an H1 grease is required.

How to use

1. Load the cartridge into the grease gun as the gun maker directs.
2. Wipe each grease fitting clean before pumping, so dirt is not driven into the bearing.
3. Pump slowly and do not over-grease; excess grease can cause heating. Bearings are normally filled 1/3 to 1/2 full.
4. Purge old grease of a different type, monitor the bearing, and set a regular schedule; re-apply as necessary.

Compatibility and cautions

Compatible with most other greases according to Super Lube, though purging is recommended when you switch. Not for use in pure oxygen environments. Read the SDS before use.

Choosing between 21036 and other formats

No grease gun? The 21030 3 oz tube is the same grease for hand application, also sold as a 3-pack of tubes. For full-size guns, the 14.1 oz 41150 cartridge holds nearly five times as much, and the 41160 canister suits hand packing. For small kits there is the ½ oz 21010 tube, and if you want the grease as a spray, the 31110 aerosol uses it as its base.